Certainly! Here's a general overview of the steps and words typically used by a technician during a Chimney Cleaning & Sweeping service:

Chimney Cleaning & Sweeping Service Report

1. Introduction & Inspection:

• "Good morning/afternoon! I’ll be performing a full cleaning and sweeping of your chimney today."
• "First, I'll start with an inspection to ensure everything is in good condition before we proceed."
• "I'll check the chimney cap, flue, and overall structure for any damage or blockages."
• "Do you use your fireplace or stove regularly? That helps me understand the build-up inside."

2. Preparation:

• "Let me put down protective coverings around the area to catch any soot or debris."
• "I’ll use a drop cloth to protect the floor and surrounding areas, and I have a vacuum ready to contain dust."
• "I’m going to set up my tools, including a chimney brush, rods, and a high-powered vacuum."

3. Sweeping & Cleaning Process:

• "Now I’ll begin sweeping the chimney with a rotary brush. This helps remove soot, creosote, and any other blockages."
• "I’m using a chimney brush with extended rods to reach the full length of the chimney."
• "The goal is to scrub the walls of the flue thoroughly to remove any built-up creosote."
• "I'll also check for any bird nests, leaves, or debris that could obstruct airflow."

4. Thorough Inspection During Cleaning:

• "As I clean, I’ll also monitor the flue to check for any cracks or signs of wear."
• "If I notice anything concerning, I’ll point it out to you right away."
• "Creosote buildup is highly flammable, so it’s important to keep the chimney clean to reduce fire risk."

5. Cleaning the Fireplace or Stove:

• "I'll also clean out your fireplace or stove area, removing ashes and any loose debris."
• "It's a good idea to make sure the fireplace or stove is clear of any build-up for optimal performance."

6. Final Inspection & Testing:

• "Once the sweeping is done, I’ll perform a final inspection of the chimney to ensure everything is clear and functioning properly."
• "I'll check the damper and the chimney cap to make sure they are working smoothly."
• "Before I finish, I'll run a quick test by lighting a small piece of paper or kindling to check the airflow and draft."

7. Clean-Up & Conclusion:

• "I’ll clean up all the soot and debris around the area to leave everything neat."
• "If there are any signs of damage or things that need to be addressed, I’ll let you know and make recommendations."
• "That should do it for the cleaning! Your chimney is now clear and ready for use."

8. Additional Notes:

• "I recommend scheduling annual chimney inspections and cleanings to keep everything in top condition."
• "If you notice any issues with the draft or smell any unusual odors, don’t hesitate to call us."

This is just a general guide, and every technician may have their own specific routine, but it covers the typical process and terminology used during a chimney cleaning and sweeping service.